Heterocyclic Building Blocks-Oxazolidine

108149-63-9, (R)-tert-Butyl 4-(hydroxymethyl)-2,2-dimethyloxazolidine-3-carboxylate is a oxazolidine compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

General procedure: To a stirred solution of 6 (0.100 g, 0.433 mmol), appropriate substituted phenol (0.649 mmol) and PPh3 (0.182 g,0.693 mmol) in anhydrous toluene (5 mL) was added DIAD(0.14 mL, 0.693 mmol) at 80 C. After 3 h, EtOAc (40 mL)was added to the resulting solution. The organic layer was washed with 0.5 M aqueous NaOH (40 mL) and water (2 X40 mL), dried over Na2SO4, filtered and concentrated. The residue was purified by flash silica gel column chromatography eluting with Hexanes/EtOAc (9:1) or (95:5) to afford compounds 7a-s.

108149-63-9, As the paragraph descriping shows that 108149-63-9 is playing an increasingly important role.

Reference£º
Article; Andrade, Saulo F.; Campos, Edmar F.S.; Teixeira, Claudia S.; Bandeira, Cristiano C.; Lavorato, Stefania N.; Romeiro, Nelilma C.; Bertollo, Caryne M.; Oliveira, Monica C.; Souza-Fagundes, Elaine M.; Alves, Ricardo J.; Medicinal Chemistry; vol. 10; 6; (2014); p. 609 – 618;,
Oxazolidine – Wikipedia
Oxazolidine | C3H7NO – PubChem

7517-99-9,7517-99-9, 5-(Hydroxymethyl)oxazolidin-2-one is a oxazolidine compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

A mixture of 5-(hydroxymethyl)-1,3-oxazolidin-2-one (3 g, 25.61 mmol), imidazole (3.49 g, 51.26 mmol), and TBSCl (4.65 g, 30.85 mmol) in N,N-dimethylformamide (120 mL) was stirred for 4 h at room temperature. The reaction was diluted with H2O, and the resulting mixture was extracted with ethyl acetate. The collected organic extract was dried over Na2SO4, filtered, and concentrated under vacuum to provide 5-[[(tert-butyldimethylsilyl)oxy]methyl]-1,3-oxazolidin-2-one (5.03 g, 85%) as a light yellow oil. LCMS(ESI): [M+H]+=232.1.

As the paragraph descriping shows that 7517-99-9 is playing an increasingly important role.

Reference£º
Patent; Genentech, Inc.; Chan, Bryan; Daniels, Blake; Drobnick, Joy; Gazzard, Lewis; Heffron, Timothy; Huestis, Malcolm; Liang, Jun; Malhotra, Sushant; Mendonca, Rohan; Rajapaksa, Naomi; Siu, Michael; Stivala, Craig; Tellis, John; Wang, Weiru; Wei, BinQing; Zhou, Aihe; Cartwright, Matthew W.; Gancia, Emanuela; Jones, Graham; Lainchbury, Michael; Madin, Andrew; Seward, Eileen; Favor, David; Fong, Kin Chiu; Good, Andrew; Hu, Yonghan; Hu, Baihua; Lu, Aijun; US2018/282328; (2018); A1;,
Oxazolidine – Wikipedia
Oxazolidine | C3H7NO – PubChem

108149-63-9, (R)-tert-Butyl 4-(hydroxymethyl)-2,2-dimethyloxazolidine-3-carboxylate is a oxazolidine compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

1-48: To a stirred soln of compound 1-47 (2.50 g, 12.5 mmol) and compound 1-17 (3.20 g, 14.0 mmol) in anhydrous DMF (20 mL) was added 60% NaH in mineral oil (560 mg, 14.0 mmol) at RT. After 3 h, water (100 mL) was added to quench the rxn. The mixture was extracted with EtOAc (2×150 mL), washed with brine (50 mL), dried over sodium sulfate and concentrated. The residue was purified by normal phase flash column chromatography on silica gel using 0-50% EtOAc in heptane to afford compound 1-48., 108149-63-9

As the paragraph descriping shows that 108149-63-9 is playing an increasingly important role.

Reference£º
Patent; EXELIXIS, INC.; XU, Wei; (170 pag.)WO2017/4609; (2017); A1;,
Oxazolidine – Wikipedia
Oxazolidine | C3H7NO – PubChem

452339-73-0, (R)-5-(2,2-Dimethyl-4H-benzo[d][1,3]dioxin-6-yl)oxazolidin-2-one is a oxazolidine compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

A solution of (5R)-5-(2, 2-DIMETHYL4H-1, 3-BENZODIOXIN-6-YL)-1, 3-OXAZOLIDIN-2-ONE (2. 00g) (WO 02/066422) in DMF (60ML) under nitrogen was treated with sodium hydride (60% dispersion in mineral oil, 385mg) and the mixture stirred at 20 for 30min. A solution of 1,6-dibromohexane (4. 94MOI) was added and the mixture was stirred at 20 for 3h. Phosphate buffer solution (pH 6.5, 30MI) and water (150ML) were added and the mixture was extracted with ET20. The extract was washed with water and dried (Na2SO4). The solvent was evaporated in vacuo and the residue purified by flash chromatography on silica gel. Elution with DCM then MEOH-DCM (1: 50) gave the title compound (2. 565G). LCMS RT = 3. 71 min.

452339-73-0, As the paragraph descriping shows that 452339-73-0 is playing an increasingly important role.

Reference£º
Patent; GLAXO GROUP LIMITED; WO2004/37768; (2004); A2;,
Oxazolidine – Wikipedia
Oxazolidine | C3H7NO – PubChem

108149-63-9, (R)-tert-Butyl 4-(hydroxymethyl)-2,2-dimethyloxazolidine-3-carboxylate is a oxazolidine compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

General procedure: To a stirred solution of 6 (0.100 g, 0.433 mmol), appropriate substituted phenol (0.649 mmol) and PPh3 (0.182 g,0.693 mmol) in anhydrous toluene (5 mL) was added DIAD(0.14 mL, 0.693 mmol) at 80 C. After 3 h, EtOAc (40 mL)was added to the resulting solution. The organic layer was washed with 0.5 M aqueous NaOH (40 mL) and water (2 X40 mL), dried over Na2SO4, filtered and concentrated. The residue was purified by flash silica gel column chromatography eluting with Hexanes/EtOAc (9:1) or (95:5) to afford compounds 7a-s., 108149-63-9

The synthetic route of 108149-63-9 has been constantly updated, and we look forward to future research findings.

Reference£º
Article; Andrade, Saulo F.; Campos, Edmar F.S.; Teixeira, Claudia S.; Bandeira, Cristiano C.; Lavorato, Stefania N.; Romeiro, Nelilma C.; Bertollo, Caryne M.; Oliveira, Monica C.; Souza-Fagundes, Elaine M.; Alves, Ricardo J.; Medicinal Chemistry; vol. 10; 6; (2014); p. 609 – 618;,
Oxazolidine – Wikipedia
Oxazolidine | C3H7NO – PubChem

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.17016-83-0,(S)-4-Isopropyl-2-oxazolidinone,as a common compound, the synthetic route is as follows.

General procedure: Sodium hydride (2.2 g, 92.9 mmol) and tetrahydrofuran (100 ml) were added in a round bottom flask at room temperature under nitrogen atmosphere. Then this mixture was cooled to 10-20 C. To the cold mixture, 4-isopropyloxazolidin-2-one (77.4 mmol) added portion wise in 4-5 min interval. Reaction mixture was stirred at 10-20 C for 1h. Then chloroacetyl chloride (16.2 g, 143 mmol) was added slowly to the reaction mixture at 0-10 C. After complete addition, temperature raised to 20-30 C and stirred for 2h. Progress of the reaction monitored on thin layer chromatography. Then after completion of reaction water (30 ml) was added slowly to the reaction mixture and extracted reaction mixture twice with ethyl acetate (50ml). Organic layer was concentrated on the laboratory rotavapor under reduced pressure at 40-45 C to afford 6a. (12.4 g, Yield 85 %). (S)-3-(2-chloroacetyl)-4-isopropyloxazolidin-2-one (6a); 1H NMR (500 MHz, CDCl3): delta, 0.90-0.96 (d, 6H), 2.41-2.47 (m, 1H), 4.29-4.31 (q, 1H), 4.34-4.39 (q, 1H), 4.47-4.50 (m, 1H), 4.71-4.79 (q, 2H) ; 13C NMR (125 MHz, CDCl3): 166.0, 153.7, 64.1, 58.7, 43.7, 28.1, 17.8, 14.6; IR (neat), nu/cm-1: 2961, 1742, 1445, 1260, 1060, 910; Anal. calcd for C8H12ClNO3: C, 46.73; H, 5.88; N, 6.81. Found: C, 46.70; H, 5.94; N, 6.78., 17016-83-0

The synthetic route of 17016-83-0 has been constantly updated, and we look forward to future research findings.

Reference£º
Article; Nehate, Sagar P.; Godbole, Himanshu M.; Singh, Girij P.; Mathew, Jessy E.; Shenoy, Gautham G.; Synthetic Communications; vol. 49; 9; (2019); p. 1173 – 1180;,
Oxazolidine – Wikipedia
Oxazolidine | C3H7NO – PubChem

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.80-65-9,3-Aminooxazolidin-2-one,as a common compound, the synthetic route is as follows.,80-65-9

To a screw-cap vial containing 3-aminooxazolidin-2-one (0.05 g) suspended in CH2CI2 (12 mL) cooled to 0 C. Then triethylamine (0.14 mL) was introduced followed by 2-fluoro-4-[5-(trifluoromethyl)- 1,2,4-oxadiazol-3-yl]benzoyl chloride (0.15 g) in one portion. The reaction contents were then poured into a separatory funnel and diluted with CH2CI2 and water. The organic layer was separated and thenwashed with 1 N HCI, 1 N NaOH, and brine. The solvent was removed under reduced pressure and the crude residue was purified by flash chromatography over silica gel (heptane:ethyl acetate gradient) togive the title compound as a white solid (mp: 186- 189C). 1H NMR (400 MHz, CDCI3): oe 8.60 (d, 1H),8.32 (d, 1H), 8.10 (d, 1H), 7.97 (d, 1H), 4.55 (t, 2H), 4.00 (t, 2H). LC/MS retention time = 0.85 minutes,361 (M+H)

80-65-9 3-Aminooxazolidin-2-one 65725, aoxazolidine compound, is more and more widely used in various fields.

Reference£º
Patent; SYNGENTA PARTICIPATIONS AG; STIERLI, Daniel; HOFFMAN, Thomas, James; BOU HAMDAN, Farhan; (82 pag.)WO2017/157962; (2017); A1;,
Oxazolidine – Wikipedia
Oxazolidine | C3H7NO – PubChem

875444-08-9, (4S,5R)-5-(3,5-Bis(trifluoromethyl)phenyl)-4-methyloxazolidin-2-one is a oxazolidine compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

875444-08-9, To a solution of (45′,5J?)-5-[3}5-bis(trifluoromethyl)phenyl]-4-methyl-li3-oxazoIidin-2-one (4.94 g, 15.77 mmol) in THF (75 mL) was added NaH (60% dispersion in mineral oil) (0.526 g, 13.14 mmol). After stirring the reaction at room temperature for 10 minutes, 3-bromo-2- (bromomethyl)-6-chloropyridine (3.0 g, 10.51 mmol) was added as a solution in THF (20 mL). The reaction was stirred at room temperature for 16 hours and then quenched with saturated NH4CI (40 mL). The mixture was diluted with EtOAc (100 mL) and hexanes (50 mL). The organic layer was washed with water (2 x 100 mL) and brine (50 mL), dried over Na2S0 , filtered, and concentrated. Purification of the residue by flash chromatography on silica gel with 0 to 50% EtOAc/hexanes afforded (4555^)-5-[3,5-bis(trifiuoromethyl)phenyl]-3-t(3-bromo-6- chloropyridin-2-yl)methyl]-4-methyl-1,3-oxazolidin-2-one. LCMS = 518.8 (M+H)+ 1H MR (CD<, 500 MHz) delta 7.90 (s, 1H), 7.81-7.83 (m, 3H), 7.18 (d, J- 8.5 Hz, 1H), 5.87 (d, J- 8.5 Hz, 1H), 5.02 (d, J= 17.2 Hz, 1H)5 4.42 (m, IE), 4.32 (d, J= 17.1 Hz, 1H), 0.80 (d, J= 6.6 Hz, 3H). 875444-08-9 (4S,5R)-5-(3,5-Bis(trifluoromethyl)phenyl)-4-methyloxazolidin-2-one 23583229, aoxazolidine compound, is more and more widely used in various fields. Reference£º
Patent; MERCK SHARP & DOHME CORP.; LU, Zhijian; CHEN, Yi-Heng; SMITH, Cameron; LI, Hong; THOMPSON, Christopher, F.; SWEIS, Ramzi; SINCLAIR, Peter; KALLASHI, Florida; HUNT, Julianne; ADAMSON, Samantha, E.; DONG, Guizhen; ONDEYKA, Debra, L.; QIAN, Xiaoxia; SUN, Wanying; VACHAL, Petr; ZHAO, Kake; WO2012/58187; (2012); A1;,
Oxazolidine – Wikipedia
Oxazolidine | C3H7NO – PubChem

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.695-53-4,5,5-Dimethyloxazolidine-2,4-dione,as a common compound, the synthetic route is as follows.

695-53-4, (b) A mixture of 4 (0.11 g, 0.77 mmol), 2 (0.10 g, 0.77 mmol), anhydrous NiCl2 (0.1 g, 0.8 mmol), urea (0.6 g, 10 mmol), and a catalytic amount of MOA was ground into a homogeneous mixture, which was transferred to a test tube and reacted at 250 C for 10 min. After cooling to room temperature, the residue was ground, and washed successively with hot water and hot 50% ethanol until the washings were colorless. The purification procedures described above afforded 8 mg of 3 (5.6%).

As the paragraph descriping shows that 695-53-4 is playing an increasingly important role.

Reference£º
Article; Dudkin, Semyon V.; Makarova, Elena A.; Fukuda, Takamitsu; Kobayashi, Nagao; Lukyanets, Evgeny A.; Tetrahedron Letters; vol. 52; 23; (2011); p. 2994 – 2996;,
Oxazolidine – Wikipedia
Oxazolidine | C3H7NO – PubChem

2346-26-1, Oxazolidine-2,4-dione is a oxazolidine compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

A solution of 2.90 g (12.99 mmol) of 4′-(2-hydroxyethyl)-3-biphenylcarbonitrile, prepared in step 11.1., 2.7 ml (14.29 mmol) of triethylamine and 0.15 g (1.30 mmol) of 4-dimethylaminopyridine in 30 ml of dichloromethane, cooled with an ice bath, is admixed with 1.1 ml (14.29 mmol) of methanesulphonyl chloride. The mixture is subsequently stirred at ambient temperature for 2 hours. 100 ml of dichloromethane and 30 ml of saturated aqueous sodium chloride solution are added. The organic phase is separated off after settling, dried over sodium sulphate and evaporated to dryness to give 3.5 g of product in the form of an oil. The product is redissolved in 60 ml of tetrahydrofuran, and 1.40 g (13.94 mmol) of 1,3-oxazolidine-2,4-dione and 2.87 ml (23.23 mmol) of 1,1,3,3-tetramethylguanidine are added. The mixture is heated at 70 C. overnight. It is evaporated to dryness. The residue is taken up in a mixture of ethyl acetate and saturated aqueous sodium chloride solution. The organic phase is separated off after settling, dried over sodium sulphate and evaporated to dryness. The residue is purified by chromatography on silica gel, eluting with a 60/40 then 50/50 mixture of cyclohexane and ethyl acetate, to give 3.3 g of product in the form of a white solid. Melting point ( C.): 121-123

2346-26-1, 2346-26-1 Oxazolidine-2,4-dione 97389, aoxazolidine compound, is more and more widely used in various fields.

Reference£º
Patent; Sanofi-Aventis; US2006/14830; (2006); A1;,
Oxazolidine – Wikipedia
Oxazolidine | C3H7NO – PubChem