Heterocyclic Building Blocks-Oxazolidine

95530-58-8, (R)-4-Isopropyloxazolidin-2-one is a oxazolidine compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated,95530-58-8

A mixture of 2-(3-bromo-phenyl)-3,3-dimethyl-1,2,3,4-tetrahydro-quinoline-6-carboxylic acid (600 mg, 1.7 mmol), (R)-4-isopropyl-2-oxazolidinone (322 mg, 2.5 mmol), copper(I) iodide (96 mg, 0.5 mmol), N,N-dimethylglycine hydrochloride (140 mg, 1.0 mmol) and potassium carbonate (923 mg, 6.7 mmol) in dimethyl sulfoxide (5 mL) was stirred at 120 C. for 16 h. Then the reaction mixture cooled to room temperature. The reaction mixture was extracted with ethyl acetate (2¡Á150 mL), washed with water (2¡Á50 mL) and saturated aqueous ammonium chloride solution (2¡Á50 mL), dried over anhydrous sodium sulfate and then concentrated in vacuo. Purification by Waters automated flash system (column: Xterra 30 mm¡Á100 mm, sample manager 2767, pump 2525, detector: ZQ mass and UV 2487, solvent system: acetonitrile and 0.1% ammonium hydroxide in water) afforded 2-[3-((R)-4-isopropyl-2-oxo-oxazolidin-3-yl)-phenyl]-3,3-dimethyl-1,2,3,4-tetrahydro-quinoline-6-carboxylic acid (555 mg, 80%) as a white solid: LC/MS m/e calcd for C24H28N2O4 (M+H)+: 409.50, observed: 409.1.

The synthetic route of 95530-58-8 has been constantly updated, and we look forward to future research findings.

Reference£º
Patent; Chen, Li; Feng, Lichun; Huang, Mengwei; Liu, Yongfu; Wu, Guolong; Wu, Jim Zhen; Zhou, Mingwei; US2011/257151; (2011); A1;,
Oxazolidine – Wikipedia
Oxazolidine | C3H7NO – PubChem

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.95715-86-9,Methyl (R)-N-Boc-2,2-dimethyloxazolidine-4-carboxylate,as a common compound, the synthetic route is as follows.

95715-86-9, To a mixture of NaBH4 (2.247 g, 59.08 mmol) and LiCI (2.505 g, 59.08 mmol) in EtOH (42 mL), stirring under nitrogen at 0C, was added (35) (7.659 g, 29.54 mmol) in THF (30 mL) dropwise. This mixture was allowed to warm to room temperature and continued stirring for 48 hours. The precipitate was filtered and washed with ethanol. The washings were concentrated and extracted with EtOAc. The organic layer was then washed with brine and dried over anhydrous Na2S04. Column chromatography on SiO2 (1 : 1 EtOAc/Hexanes) was utilized to purify 6.101 g (89%) of the title compound as a white solid.

As the paragraph descriping shows that 95715-86-9 is playing an increasingly important role.

Reference£º
Patent; UNIVERSITY OF VIRGINIA PATENT FOUNDATION; WO2005/41899; (2005); A2;,
Oxazolidine – Wikipedia
Oxazolidine | C3H7NO – PubChem

90719-32-7, (S)-4-Benzyloxazolidin-2-one is a oxazolidine compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

90719-32-7, (S)-4-Benzyl-2-oxazolidinone Compound H (40 g, 226 mmol) was taken in a 1 L round bottom flask, 450 mL THF was added and the system was placed at -78 C. To this was slowly added (100 mL, 248.6 mmol) of n-butyllithium.The mixed system was stirred at -78 C for 30 min, then propionyl chloride (25 g, 270 mmol) was added.The reaction system was reacted at -78 C and then gradually warmed to room temperature. The reaction was monitored by TLC until the reaction was complete. The reaction was quenched with saturated aq. The combined organic phases were dried with sodium sulfate, filtered and evaporatedThe column was then separated to give a white solid J.

90719-32-7 (S)-4-Benzyloxazolidin-2-one 736225, aoxazolidine compound, is more and more widely used in various fields.

Reference£º
Patent; Ocean University of China; Xu Tao; Yu Haiyong; Zong Yan; (21 pag.)CN108484631; (2018); A;,
Oxazolidine – Wikipedia
Oxazolidine | C3H7NO – PubChem

2346-26-1, Oxazolidine-2,4-dione is a oxazolidine compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated,2346-26-1

solution of 0.5 g (1.96 mmol) of 3-chloro-4-(chloromethyl)-4′-fluoro-1,1′-biphenyl, prepared in step 5.3., 0.240 g (2.35 mmol) of 1,3-oxazolidine-2,4-dione and 0.45 g (3.92 mmol) of 1,1,3,3-tetramethylguanidine in 10 ml of tetrahydrofuran is refluxed for 18 hours. The mixture is allowed to return to ambient temperature and is concentrated under reduced pressure. The residue is taken up in dichloromethane and water and the aqueous phase is separated and extracted twice with dichloromethane. The combined organic phases are washed with saturated aqueous sodium chloride solution and dried over sodium sulphate. Following evaporation of the solvent the residue obtained is purified by chromatography on silica gel, eluting with a 20/80 mixture of ethyl acetate and cyclohexane. This gives 0.33 g of pure product in the form of a white solid. m.p. ( C.): 108-110 C.

As the paragraph descriping shows that 2346-26-1 is playing an increasingly important role.

Reference£º
Patent; Sanofi-Aventis; US2006/14830; (2006); A1;,
Oxazolidine – Wikipedia
Oxazolidine | C3H7NO – PubChem

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.695-53-4,5,5-Dimethyloxazolidine-2,4-dione,as a common compound, the synthetic route is as follows.

695-53-4, General procedure: To a solution of 4-methoxybenzoyl chloride (0.307 g, 1.80 mmol) in dry THF (6.6 mL) was added a solution of triethylamine (1.80-2.7 mmol) in dry THF (0.4 mL). After stirring for 10 min at room temperature, the appropriate oxazolidine-2,4-dione (2.7 mmol of crude 7a or 1,16 mmol of 5,5-dimethyloxazolidinedione or 7b) was added to the reaction mixture and the resulting solution was refluxed for 17-20 h. The synthesis of 4g was monitored by 1H-NMR. After filtration of the reaction mixture, the solvent was evaporated and the residue obtained was purified by chromatography or by recrystallization.

The synthetic route of 695-53-4 has been constantly updated, and we look forward to future research findings.

Reference£º
Article; Santana, Ana Bela; Lucas, Susana D.; Goncalves, Lidia M.; Correia, Henrique F.; Cardote, Teresa A.F.; Guedes, Rita C.; Iley, Jim; Moreira, Rui; Bioorganic and Medicinal Chemistry Letters; vol. 22; 12; (2012); p. 3993 – 3997;,
Oxazolidine – Wikipedia
Oxazolidine | C3H7NO – PubChem

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.497-25-6,Oxazolidin-2-one,as a common compound, the synthetic route is as follows.,497-25-6

A mixture of 2-(3-bromo-phenyl)-6-chloro-4,4-dimethyl-1,2,3,4-tetrahydro-quinoline-8-carboxylic acid methyl ester (1 g, 2.5 mmol), oxazolidin-2-one (230 mg, 2.63 mmol), copper(I) iodide (95 mg, 0.5 mmol), N,N’-dimethyl-ethane-1,2-diamine (0.11 mL, 1 mmol), and potassium carbonate (1.04 g, 7.5 mmol) in dimethyl sulfoxide (10 mL). The reaction mixture was stirred at 120 C. for 16 h. Then the reaction mixture cooled to room temperature. The reaction mixture was extracted with ethyl acetate (2¡Á50 mL), washed with water (2¡Á20 mL) and saturated aqueous ammonium chloride solution (2¡Á20 mL), dried over anhydrous sodium sulfate and then concentrated in vacuo. Purification by Waters automated flash system (column: Xterra 30 mm¡Á100 mm, sample manager 2767, pump 2525, detector: ZQ mass and UV 2487, solvent system: acetonitrile and 0.1% ammonium hydroxide in water) afforded 6-chloro-4,4-dimethyl-2-[3-(2-oxo-oxazolidin-3-yl)-phenyl]-1,2,3,4-tetrahydro-quinoline-8-carboxylic acid (0.8 g, 80%) as a white solid: MS (ESI) M+1=400.1.

The synthetic route of 497-25-6 has been constantly updated, and we look forward to future research findings.

Reference£º
Patent; Feng, Lichun; Huang, Mengwei; Liu, Yongfu; Wu, Guolong; Yan, Shixiang; Yun, Hongying; Zhou, Mingwei; US2012/190677; (2012); A1;,
Oxazolidine – Wikipedia
Oxazolidine | C3H7NO – PubChem

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.90719-32-7,(S)-4-Benzyloxazolidin-2-one,as a common compound, the synthetic route is as follows.

90719-32-7, Add 1000ml of dichloromethane to a 5-liter four-neck bottle.Triethylamine 500ml (3.6mol), benzyl oxazolidinone 177g(1 mol), 80 g (1.1 mol) of propionic acid,Add 300g (1mol)a solution of methyl 2-chloropyridine p-toluenesulfonate in 1000 ml of dichloromethane,After the addition, stirring at 20 C for 7 hours, TLC showed the reaction was complete, and the reaction was added with water.The organic phase was washed with water and brine, dried over anhydrous sodiumRecrystallization gave 220 g of product with a yield of 94.4% and HPLC purity >99%.

The synthetic route of 90719-32-7 has been constantly updated, and we look forward to future research findings.

Reference£º
Patent; Shanghai Lark Pharmaceutical Technology Co., Ltd.; Shen Xin; Yang Jidong; Hu Xiaochuan; Li Feng; (6 pag.)CN109020914; (2018); A;,
Oxazolidine – Wikipedia
Oxazolidine | C3H7NO – PubChem

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.875444-08-9,(4S,5R)-5-(3,5-Bis(trifluoromethyl)phenyl)-4-methyloxazolidin-2-one,as a common compound, the synthetic route is as follows.

875444-08-9, iNTERMEDIATE 29 (4S,5R?)-5- 13 ,5-Bis(trifluoromethyl)phenyl] -3- F(5-bromo-2-chloropyridin-4-yl)methyll -4-methyl- 1 ,3-oxazolidin-2-oneA solution of (4S,5R)-5- [3 ,5-bis(trifluoromethyl)phenyl] -4-methyl- 1,3 -oxazolidin-2-one(INTERMEDIATE 4, 1.305 g, 4.17 mmol) in 30 mL of DMF was cooled to -20C. NaHMDS(1.0 M, 4.17 ml, 4.17 mmol) was added and the reaction was stirrred at -20C for 20 minutes.Next, a solution of (5-bromo-2-chloropyridin-4-yl)methyl methanesulfonate (II?1TERMEDIATE28, 1.2522 g, 4.17 mmol) in 5 mL of DMF was added and the solution turned brown. Thereaction was warmed to 0C by switching to an ice/water bath and the reaction stirred for an additional 30 minutes, at which time an LCMS aliquot confirmed the reaction was complete. It was quenched with aqueous NaHCO3. The reaction was extracted with ethyl acetate, then washed with aqueous NaHCO3 and brine, dried with Na2SO4, filtered and the filtrate was concentrated. The crude oil was purified by silica gel chromatography to give the titledcompound as an off-white solid. ?H NMR (CDC13, 500 MHz): 8.52 (s, 1H), 7.92 (s, 1H), 7.80 (s, 2H), 7.36 (s, 1H), 5.81 (d, 1H), 4.78 (d, 1H), 4.34 (d, 1H), 4.17 (m, 1H), 0.82 (d, 3H).

875444-08-9 (4S,5R)-5-(3,5-Bis(trifluoromethyl)phenyl)-4-methyloxazolidin-2-one 23583229, aoxazolidine compound, is more and more widely used in various fields.

Reference£º
Patent; MERCK SHARP & DOHME CORP.; ACTON, John, J., III; YE, Feng; VACHAL, Petr; SHA, Deyou; DROPINSKI, James, F.; CHU, Lin; ONDEYKA, Debra; KIM, Alexander, J.; COLANDREA, Vincent, J.; ZANG, Yi; ZHANG, Fengqi; DONG, Guizhen; WO2013/165854; (2013); A1;,
Oxazolidine – Wikipedia
Oxazolidine | C3H7NO – PubChem

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.95715-86-9,Methyl (R)-N-Boc-2,2-dimethyloxazolidine-4-carboxylate,as a common compound, the synthetic route is as follows.

95715-86-9, To a solution of (S)-2, 2-Dimethyl-oxazolidine-3, 4-dicarboxylic acid 3-tert-butyl ester 4-methyl ester (435 mg, 1.678 mmol) in THF (5 ml) under nitrogen atmosphere was added 1 N-LiAIH4 (5 ml, 5.033 mmol) at degrees C and the mixture was stirred at room temperature for 1 h. The mixture was quenched with water and 10% NaOH solution, filtered through celite. The filtrate was diluted with EtOAc and washed with brine, dried over MgS04, filtered, and concentration in vacuo. The obtained residue was purified by flash chromatography eluting with 5: 1 Hexane/Ethyl acetate to give the (R)-4-Hydroxymethyl-2, 2-dimethyl- oxazolidine-3-carboxylic acid ter-butyl ester (383 mg, 99%) as a white solid. To a solution of (R)-4-Hydroxymethyl-2, 2-dimethyl-oxazolidine-3-carboxylic acid ter-butyl ester (383 mg, 1.656 mmol) in anhydrous pyridine (4 ml) under nitrogen atmosphere was added tosyl chloride (631 mg, 3.312 mmol) at 0 degrees C and the mixture was stirred for 24 h. The reaction mixture was concentrated under reduced pressure and diluted with EtOAc, washed with brine, dried over MgS04, filtered, and concentrated. Recrystallization from EtOAc-n-hexane to give the title compound (554 mg, 87%). 1H-NMR (300MHz, CDCI3) : 1.40 (s, 9H), 1.54 (s, 3H), 2.45 (s, 3H), 3.78-4. 20 (m, 5H), 7.40 (d, 2H), 7.81 (d, 2H); MS (ESI+) : 408 ([M+Na] +).

As the paragraph descriping shows that 95715-86-9 is playing an increasingly important role.

Reference£º
Patent; CHUGAI SEIYAKU KABUSHIKI KAISHA; WO2005/87700; (2005); A2;,
Oxazolidine – Wikipedia
Oxazolidine | C3H7NO – PubChem

497-25-6, Oxazolidin-2-one is a oxazolidine compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

General procedure for Goldberg reactionThis protocol was performed according to conditions disclosed in Org. Lett. 2003, 5 (7), 963.To a suspension of copper(l) iodide (0.354 g, 1.86 mmol), potassium carbonate (7.35 g, 53.2 mmol) and (+/-)-/ra?j-l,2-diaminocyclohexane (0.328 ml, 2.67 mmol) in dioxane, (15 ml) 9 (5 g, 26.7 mmol) and 10b (2.352 g, 27.01 mmol) were added and the reaction mixture was stirred at 100 C for 20 h. Reaction mixture was cooled and filtered through silica gel pad with the help of EtOAc (150 ml). Filtrate was concentrated in vacuo to 11 b 4.7 g (91 %), 497-25-6

The synthetic route of 497-25-6 has been constantly updated, and we look forward to future research findings.

Reference£º
Patent; CAMBRIDGE ENTERPRISE LIMITED; GLEN, Robert; HILEY, Robin; BELL, James; SPRING, David; KAPADNIS, Prashant, Bhimrao; WO2011/98776; (2011); A1;,
Oxazolidine – Wikipedia
Oxazolidine | C3H7NO – PubChem