Downstream synthetic route of 139009-66-8

139009-66-8, As the paragraph descriping shows that 139009-66-8 is playing an increasingly important role.

139009-66-8, (S)-N-Boc-2,2-dimethyloxazolidine-4-carboxylic Acid is a oxazolidine compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

Step 7: Preparation of (S)-tert-butyl 4-((2-(4-chlorobenzoyl)-4-methoxyphenyl)carbamoyl)-2,2-dimethyloxazolidine-3 -carboxylate (Intermediate 9) To a solution of (S)-3 -(tert-butoxycarbonyl)-2,2-dimethyloxazolidine-4- carboxylic acid (4.78 g, 19.5 mmol) in DCM (100 mL) was added Nmethylmorpholine (2.57 mL, 23.4 mmol) followed by isobutyl chioroformate (3.07 mL, 23.4 mmol) at 0 C. After stirred for 30 mm at room temperature, (2-amino-5-methoxyphenyl)(4-chlorophenyl)methanone (5.10 g, 19.5 mmol) was added to the mixture. The resulting mixture was stirred overnight at room temperature. The reaction mixture was diluted with DCM, washed with 2 N aq. HC1, saturated aq. NaHCO3 and water, dried over Na2SO4, filtered and concentrated in vacuo. The residue was purified by column chromatography on Si02 (Hex:EtOAc = 5:1 to 3:1 to1:1) to obtain the title compound (8.50 g, 89%) as viscous yellow oil. ?H-NMR (400 MHz, CDC13): (two sets from rotamers) 6 10.83 and 10.73 (brs and brs, 1H), 8.56 (brs, 1H), 7.69 (d, J= 7.6 Hz, 2H), 7.45 (d, J= 8.4 Hz, 2H), 7.14 (d, J- 8.0 Hz, 1H), 6.98 (brs, 1H), 4.21-4.51 (m, 3H), 3.76 (s, 3H), 1.84 and 1.79 (s and s, 3H), 1.59 and 1.57 (s and s, 4H), 1.46 (s, 3H), 1.24-1.29 (m, 5H).

139009-66-8, As the paragraph descriping shows that 139009-66-8 is playing an increasingly important role.

Reference£º
Patent; KAINOS MEDICINE, INC.; OH, Su-Sung; CHOI, Minjeong; WO2015/156601; (2015); A1;,
Oxazolidine – Wikipedia
Oxazolidine | C3H7NO – PubChem

 

New learning discoveries about 695-53-4

As the paragraph descriping shows that 695-53-4 is playing an increasingly important role.

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.695-53-4,5,5-Dimethyloxazolidine-2,4-dione,as a common compound, the synthetic route is as follows.

695-53-4, To a solution of 150mg (0.488mol) of the compound obtained in the Example 122 in 5mL of tetrahydrofuran were added 75.6mg (0.586mmol) of 5,5-dimethyloxazolidine-dione, 154mg (0.586mmol) of triphenylphsophine and 267muL (0.586mmol) of diethyl azodicarboxylate (40% toluene solution), and the mixture was stirred for 2 hours at room temperature. After the reaction, water was added to the reaction mixture and the mixture was extracted with dichloromethane. The organic layer was dried over with anhydrous sodium sulfate and the solvent was removed under reduced pressure. The resulting residue was purified by silica gel column chromatography (eluent: dichloromethane/acetone = 2/1 for first trial, and hexane/ethyl acetate = 2/1 for second trial) to give 133mg (65%) of the title compound.

As the paragraph descriping shows that 695-53-4 is playing an increasingly important role.

Reference£º
Patent; Daiichi Asubio Pharma Co., Ltd.; EP1775298; (2007); A1;,
Oxazolidine – Wikipedia
Oxazolidine | C3H7NO – PubChem

 

Some tips on 695-53-4

695-53-4 5,5-Dimethyloxazolidine-2,4-dione 3081, aoxazolidine compound, is more and more widely used in various fields.

695-53-4,With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.695-53-4,5,5-Dimethyloxazolidine-2,4-dione,as a common compound, the synthetic route is as follows.

A mixture of 1,2-dicyanonaphthalene (0.071 g, 0.4 mmol), 2 (0.103 g, 0.8 mmol), anhydrous NiCl2 (0.104 g, 0.8 mmol), urea (0.096 g, 1.6 mmol) and a catalytic amount of MOA was stirred in quinoline (5 mL) at 250 C under argon for 30 min. After cooling to room temperature, the reaction mixture was diluted with 50% ethanol (50 mL). The resultant precipitate was filtered off and washed successively with hot water and hot 50% ethanol until the washings were colorless. The crude residue was extracted with toluene using a Soxhlet apparatus, which was concentrated to approximately 5 mL, and purified by silica gel column with toluene as the eluent. The green-blue fraction was collected to give 7.5 mg of 5 (8.0%). MASS (MALDI) (m/z): 702 (M+).

695-53-4 5,5-Dimethyloxazolidine-2,4-dione 3081, aoxazolidine compound, is more and more widely used in various fields.

Reference£º
Article; Dudkin, Semyon V.; Makarova, Elena A.; Fukuda, Takamitsu; Kobayashi, Nagao; Lukyanets, Evgeny A.; Tetrahedron Letters; vol. 52; 23; (2011); p. 2994 – 2996;,
Oxazolidine – Wikipedia
Oxazolidine | C3H7NO – PubChem

 

Some tips on 497-25-6

The synthetic route of 497-25-6 has been constantly updated, and we look forward to future research findings.

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.497-25-6,Oxazolidin-2-one,as a common compound, the synthetic route is as follows.

General procedure: In a two-neck round-bottom flask equipped with a stir-bar, CuCl2 (0.2 equiv), oxazolidin-2-one (5.0 equiv), Na2CO3 or Cs2CO3 (2.0 equiv) and molecular sieve (4) were combined. The reaction flask was purged with oxygen for 15 min. A solution of pyridine (2.0 equiv) in dry toluene (0.2 M) was added to the reaction flask via a syringe at room temperature. Two balloons filled with oxygen were connected to the reaction flask via a needle. The flask was placed in an oil-bath and heated to 70 C. A solution of alkyne (1.0 equiv) in dry toluene was added over 4 h using a syringe pump. After the addition was completed, the reaction mixture was stirred at 70 C for 8 h and then cooled to room temperature. The crude mixture was concentrated under vacuum and the residue was purified by flash chromatography on silica gel., 497-25-6

The synthetic route of 497-25-6 has been constantly updated, and we look forward to future research findings.

Reference£º
Article; Lingua, Hugo; Vibert, Francois; Mouysset, Dominique; Siri, Didier; Bertrand, Michele P.; Feray, Laurence; Tetrahedron; vol. 73; 25; (2017); p. 3415 – 3422;,
Oxazolidine – Wikipedia
Oxazolidine | C3H7NO – PubChem

 

Downstream synthetic route of 80-65-9

As the paragraph descriping shows that 80-65-9 is playing an increasingly important role.

80-65-9, 3-Aminooxazolidin-2-one is a oxazolidine compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

80-65-9, General procedure: Following the addition of 4-(4-fluorophenoxy) butyric acid (0.71 g, 3.6 mmol) to 20 mL ofdichloromethane in a 50 mL three-necked round-bottom flask, thesolution was agitated until dissolution. Subsequently, EDCI (0.85 g,4.44 mmol) HOBt (0.6 g, 4.44 mmol) and triethylamine (0.84 g,9.25 mmol) were added in turn at 0 C. Stirring in an ice bath for 1 h,3-amino-2-oxazolidinone (0.37 g, 3.6 mmol) was added again. Thesolutionwas brought to 25 C and stirred overnight. Following TLC,the product was filtered by vacuum and dried under rotary evaporation.The product was a white solid weighing 0.51 g with a yieldof 50.2%.

As the paragraph descriping shows that 80-65-9 is playing an increasingly important role.

Reference£º
Article; Jiang, Kai; Yan, Xinlin; Yu, Jiahao; Xiao, Zijian; Wu, Hao; Zhao, Meihua; Yue, Yuandong; Zhou, Xiaoping; Xiao, Junhai; Lin, Feng; European Journal of Medicinal Chemistry; vol. 194; (2020);,
Oxazolidine – Wikipedia
Oxazolidine | C3H7NO – PubChem

 

Downstream synthetic route of 90719-32-7

As the paragraph descriping shows that 90719-32-7 is playing an increasingly important role.

90719-32-7,90719-32-7, (S)-4-Benzyloxazolidin-2-one is a oxazolidine compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

Commercially available compound 24a (800 mg, 4.5 mmol) was dissolved in anhydrous THF (30 mL) in dry glassware under N2, and cooled to -78 C in a dry ice/acetone bath. A solution of 1.6 M n-butyllithium in hexanes (5.0 mmol, 3.1 mL) was syringed in over 3 min. After mixing for 30 min, propionyl chloride (5.0 mmol, 0.43 mL) was syringed in over 3 min. The solution was allowed to slowly warm to room temperature over 14 h and quenched by the addition of saturated NH4Cl (10 mL) and H2O (30 mL). The final aqueous layer was extracted with ethyl acetate (3 ¡Á 40 mL) and the combined organic extracts were dried over MgSO4 and concentrated in vacuo to yield 25a (oil, 1.0 g, 96% yield) which was >95% pure by HPLC. 1H NMR (500 MHz, CDCl3): delta 7.33 (dd, J1 = 7.4 Hz, J2 = 7.6 Hz, 2H), 7.29 (d, J = 6.9 Hz, 1H), 7.21 (d, J = 7.4 Hz, 2H), 4.67 (m, 1H), 4.18 (m, 2H), 3.31 (dd, J1 = 13.3 Hz, J2 = 3.2 Hz, 1H), 2.96 (m, 2H), 2.77 (dd, J1 = 13.3 Hz, J2 = 3.7 Hz, 1H), 1.21 (t, J = 7.4 Hz, 3H).

As the paragraph descriping shows that 90719-32-7 is playing an increasingly important role.

Reference£º
Article; Girnys, Elizabeth A.; Porter, Vanessa R.; Mosberg, Henry I.; Bioorganic and Medicinal Chemistry; vol. 19; 24; (2011); p. 7425 – 7434;,
Oxazolidine – Wikipedia
Oxazolidine | C3H7NO – PubChem

 

Simple exploration of 95715-86-9

95715-86-9 Methyl (R)-N-Boc-2,2-dimethyloxazolidine-4-carboxylate 688220, aoxazolidine compound, is more and more widely used in various fields.

95715-86-9, Methyl (R)-N-Boc-2,2-dimethyloxazolidine-4-carboxylate is a oxazolidine compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

95715-86-9, To a cooled (-78 C) solution of (S)-2,2-dimethyl-oxazolidine-3,4-dicarboxylic acid 3-tert-butyl ester 4-methyl ester (2 g, 7.7 mmol) in dry toluene (20 mL) in a Schlenk flask was added dropwise 1 M standard solution of diisobutylaluminum hydride in toluene (13.3 mL). The reaction mixture was stirred for 2 h at -78 C. Then the reaction was quenched by adding slowly methanol (5 mL) cooled to -78 C. The resulting white emulsion was slowly poured into ice-cold 1 M HCl (100 mL) and extracted with ethyl acetate (3 x 50 mL). The combined extracts were washed with brine (2 x 50 mL) and water (50 mL), dried over Na2SO4 and concentrated in vacuo. The crude product was purified by column chromatography (hexane – ethyl acetate v/v 9 : 1) and 1.5 g (85%) of a colorless oil was isolated. 1H and 13C NMR spectra were consistent with literature data.5 IR (ATR, cm-1) nu: 3018, 2978, 1697, 1368, 1168, 1095; 1H NMR (400 MHz, CDCl3, rotamers) delta: 9.61 (d, J = 0.8 Hz, 0.4H, CHO), 9.55 (d, J = 2.4 Hz, 0.6H, CHO), 4.34 (m, 0.4H, CH-N), 4.19 (m, 0.6H, CH-N), 4.08 (m, 2H, CH2-O), 1.65 (s, 1.7H), 1.60 (s, 1.3H), 1.56 (s, 2H), 1.51 (s, 4.5H), 1.43 (s, 5.5H) 13C NMR (100 MHz, CDCl3, minor rotamer marked with *) delta: 199.4, 152.6*, 151.3, 95.1, 94.3*, 81.4*, 81.1, 64.7, 63.9, 63.4*, 28.3, 26.7*, 25.8, 24.7*, 23.8; MS (ESI) m/z: [M+Na]+ 252.

95715-86-9 Methyl (R)-N-Boc-2,2-dimethyloxazolidine-4-carboxylate 688220, aoxazolidine compound, is more and more widely used in various fields.

Reference£º
Article; Hryniewicka, Agnieszka; ?otowski, Zenon; Seroka, Barbara; Witkowski, Stanis?aw; Morzycki, Jacek W.; Tetrahedron; vol. 74; 38; (2018); p. 5392 – 5398;,
Oxazolidine – Wikipedia
Oxazolidine | C3H7NO – PubChem

 

Brief introduction of 108149-63-9

108149-63-9, The synthetic route of 108149-63-9 has been constantly updated, and we look forward to future research findings.

108149-63-9, (R)-tert-Butyl 4-(hydroxymethyl)-2,2-dimethyloxazolidine-3-carboxylate is a oxazolidine compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

To a solution of compound 35 (4 g, 18 mmol), intermediate 2 (4.8 g, 21.7 mmol) and triphenylphosphine (7.0 g, 27 mmol) in DCM (80mL) was added diisopropylazodicarboxylate (5.4 g, 27 mmol). The reaction mixture was stirred at RT for 3 h. Water was added and the product was extracted with DCM. Purification by flash column chromatography gave compound 36 (5.8 g, 73%).

108149-63-9, The synthetic route of 108149-63-9 has been constantly updated, and we look forward to future research findings.

Reference£º
Patent; EXELIXIS, INC.; XU, Wei; (170 pag.)WO2017/4609; (2017); A1;,
Oxazolidine – Wikipedia
Oxazolidine | C3H7NO – PubChem

 

New learning discoveries about 108149-63-9

108149-63-9, As the paragraph descriping shows that 108149-63-9 is playing an increasingly important role.

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.108149-63-9,(R)-tert-Butyl 4-(hydroxymethyl)-2,2-dimethyloxazolidine-3-carboxylate,as a common compound, the synthetic route is as follows.

General procedure: To a stirred solution of 6 (0.100 g, 0.433 mmol), appropriate substituted phenol (0.649 mmol) and PPh3 (0.182 g,0.693 mmol) in anhydrous toluene (5 mL) was added DIAD(0.14 mL, 0.693 mmol) at 80 C. After 3 h, EtOAc (40 mL)was added to the resulting solution. The organic layer was washed with 0.5 M aqueous NaOH (40 mL) and water (2 X40 mL), dried over Na2SO4, filtered and concentrated. The residue was purified by flash silica gel column chromatography eluting with Hexanes/EtOAc (9:1) or (95:5) to afford compounds 7a-s.

108149-63-9, As the paragraph descriping shows that 108149-63-9 is playing an increasingly important role.

Reference£º
Article; Andrade, Saulo F.; Campos, Edmar F.S.; Teixeira, Claudia S.; Bandeira, Cristiano C.; Lavorato, Stefania N.; Romeiro, Nelilma C.; Bertollo, Caryne M.; Oliveira, Monica C.; Souza-Fagundes, Elaine M.; Alves, Ricardo J.; Medicinal Chemistry; vol. 10; 6; (2014); p. 609 – 618;,
Oxazolidine – Wikipedia
Oxazolidine | C3H7NO – PubChem

 

Analyzing the synthesis route of 108149-63-9

The synthetic route of 108149-63-9 has been constantly updated, and we look forward to future research findings.

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.108149-63-9,(R)-tert-Butyl 4-(hydroxymethyl)-2,2-dimethyloxazolidine-3-carboxylate,as a common compound, the synthetic route is as follows.

Compound 1-150 TFA salt (60.0 mg, 0.121 mmol) and compound 1-17 (84.0 mg, 0.363 mmol) were dissolved in dry THF (3.0 mL) in a 100 mL rbf under N2. The flask was cooled in an ice/water bath for 5 min. KHMDS (0.5 in toluene, 0.97 mL, 0.49 mmol) was added dropwise. The resulting rxn soln was stirred at 0C for 2 h then slowly warmed to RT in 1.5 h and continued to stir at RT for 1 h. The mixture was cooled to 0C again and quenched with slow addition of sat’d NH4C1 aq soln (4.5 mL). The mixture was diluted with EtOAc (50 mL) and sat’d NaHC03 aq soln (5 mL). The layers were separated and the organic layer was further washed with water (1 mL). The organic layer was then dried over anhydrous sodium sulfate, filtered, and concentrated. The resulting crude pdt was purified by normal phase flash chromatography using 0-10% MeOH/DCM as the gradient to afford compound 1-18., 108149-63-9

The synthetic route of 108149-63-9 has been constantly updated, and we look forward to future research findings.

Reference£º
Patent; EXELIXIS, INC.; XU, Wei; (170 pag.)WO2017/4609; (2017); A1;,
Oxazolidine – Wikipedia
Oxazolidine | C3H7NO – PubChem