Tag: M.W:100-200

90319-52-1, (R)-4-Phenyloxazolidin-2-one is a oxazolidine compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

Example 24 3-[(3R)-1-oxo-3-[3-(phenylmethoxy)phenyl]pentyl]-4R-phenyl-2-Oxazolidinone The 4R-phenyl-2-oxazolidinone (3.5g, 21.4mmol) was placed in a three-necked flask, after it was purged with nitrogen, tetrahydrofuran was added and it was cooled to -78¡ãC, then n-butyl lithium (1.6M, 13.8ml, 22mmol) was added dropwise, and the reaction was carried out for 30 minutes. After that, a solution of (R)-3-(3-(benzyloxy) phenyl) pentanoyl chloride (7.1g, 23.6mmol) in tetrahydrofuran was added dropwise, the reaction was continued for 30 minutes, then it was slowly raised to 0¡ãC, the reaction was continued for 2 hours, and then quenched with saturated ammonium chloride solution. The reaction solution was then concentrated to remove tetrahydrofuran and extracted with ethyl acetate 3 times, then the organic phases were combined, washed with saturated brine, dried over anhydrous sodium sulfate, concentrated, and recrystallized with petroleum ether and ethyl acetate to give a white solid 8.6g, yield: 85percent. 1HNMR(CDCl3): delta 7.3-7.5 (8H, m), 7.1-7.2(3H, m), 6.7-6.9(3H, m), 5.2(1H, dd, J=3.7,8.6), 5.1(2H, s), 4.5(1H, t, J=8.9,17.1), 4.2(1H, dd, J=3.5,8.6), 3.5(1H, dd, J=8.9,16.4), 3.2(1H, d, J=5.6), 3.1(1H, m), 1.5-1.7(2H, m), 0.9(3H, t, J=7.3,14.7). ESI-MS: 430.5(M+H)., 90319-52-1

The synthetic route of 90319-52-1 has been constantly updated, and we look forward to future research findings.

Reference£º
Patent; Shanghai Institute Materia Medica, Chinese Academy Of Sciences; Topharman Shanghai Co., Ltd.; ZHANG, Qiang; ZHANG, Rongxia; TIAN, Guanghui; LI, Jianfeng; ZHU, Fuqiang; JIANG, Xiangrui; SHEN, Jingshan; EP2671878; (2013); A1;,
Oxazolidine – Wikipedia
Oxazolidine | C3H7NO – PubChem

99395-88-7, (S)-4-Phenyloxazolidin-2-one is a oxazolidine compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

EXAMPLE 4 PREPARATION OF 1-[(5-METHOXY-1,5-DIOXOPENTA)-YL1-4-(S)-PHENYL OXAZOLIDIN-2-ONE (FORMULA III) 300 g of monomethyl glutarate was taken into a four neck round bottom flask containing 1500 ml of dichloromethane under stirring. 684 ml of triethyl amine was added at 20 C. followed by the addition of 306 ml of pivaloyl chloride. The reaction mixture was stirred at room temperature for 3 hours. 267 g of (S)-4-Phenyl-2-oxazolidinone and 17 g of dimethyl aminopyrimidine was added and heated to 45 C. The reaction mass was maintained at 42 to 45 C. for 7 hours. Reaction completion was confirmed by thin layer chromatography. The reaction mass was cooled to room temperature and 1500 ml of water was added to it. The aqueous layer was separated and extracted with 750 ml of dichloromethane in two equal lots. Total organic layer was washed with 750 ml of water in two equal lots. The organic layer was evaporated under vacuum at 63 C. to get an oily compound. 1200 ml of n-heptane was charged to this oily compound and stirred for 60 minutes. Filtered the separated solid and washed with 600 ml of n-heptane. The compound was dried at 30 C. for 8 hours to get 449 g of the title compound as a crystalline solid. (Yield 75%) Purity by HPLC: 93.48%., 99395-88-7

The synthetic route of 99395-88-7 has been constantly updated, and we look forward to future research findings.

Reference£º
Patent; Uppala, Venkata Bhaskara Rao; Vaddadi, Pattabhi Ramayya; Sunkara, Vishnu Vardhan; Cheemalapati, Venkata Annapurna Sasikala; Padaga, Kanaka Seshu Kumar; US2007/49748; (2007); A1;,
Oxazolidine – Wikipedia
Oxazolidine | C3H7NO – PubChem

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.99395-88-7,(S)-4-Phenyloxazolidin-2-one,as a common compound, the synthetic route is as follows.

Add 10 ml of dichloromethane, 500 ml of triethylamine (3.6 mol), and phenyloxazolidinone 163 g to a 5-liter four-necked bottle.(1 mol), propionic acid 80 g (1.1 mol), 300 g (1 mol)2-chloropyridine methyl p-toluenesulfonate salt 1000 ml of dichloromethaneThe solution was added and stirred at 25 C for 5 hours. TLC showed the reaction was complete, and the mixture was extracted with water and washed with water and saturated brine.The organic phase was dried over anhydrous sodium sulfate, concentrated, and then recrystallised to give product 200 g, yield: 91.3%, HPLC purity >99%., 99395-88-7

As the paragraph descriping shows that 99395-88-7 is playing an increasingly important role.

Reference£º
Patent; Shanghai Lark Pharmaceutical Technology Co., Ltd.; Shen Xin; Yang Jidong; Hu Xiaochuan; Li Feng; (6 pag.)CN109020914; (2018); A;,
Oxazolidine – Wikipedia
Oxazolidine | C3H7NO – PubChem

90319-52-1, (R)-4-Phenyloxazolidin-2-one is a oxazolidine compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

General procedure: n-Butyllithium (1.15mL, 1.0equiv, 2.3M in hexanes) was added to a cooled until ?75¡ãC solution of the corresponding oxazolidinone (2.6mmol) in anhydrous THF (12mL), then the resulting solution was warmed to ?30¡ãC and stirred for 20min. At the same temperature, a solution of cinnamoyl chloride (1.0equiv) in anhydrous THF (7mL) was added dropwise and then allowed to rise to at room temperature and left overnight with continuous stirring. After work-up with 10percent NH4Cl (15mL), the organic layer was separated and the aqueous layer was extracted with ethyl acetate (2¡Á25ml). The combined organic phase was dried over Na2SO4, filtered and evaporated under reduced pressure. The crude products were purified by chromatography or crystallized from appropriate solvents. 4.3.1 (R)-4-Phenyl-3-[(E)-(3-phenylacryloyl)]-oxazolidin-2-one 2a. White crystals (0.28g, 62percent yield) after crystallization (Et2O/EtOAc, 1:1); mp 169?170¡ãC. 1H NMR (200MHz, CDCl3) delta 4.32 (dd, J=3.8, 8.8Hz, 1H, NCHCH2), 4.74 (t, J=8.8Hz, 1H, NCHCH2), 5.56 (dd, J=3.8, 8.8Hz, 1H, NCHCH2), 7.28?7.48 (m, 8H, aromH), 7.52?7.66 (m, 2H, aromH), 7.78 (d, J=15.7Hz, 1H, CH=CH?CO), 7.95 (d, J=15.7Hz, 1H, CH=CH?CO). 13C NMR (75MHz, CDCl3) delta 58.0, 70.1, 117.0, 126.1, 128.7, 128.8, 129.0, 129.3, 130.8, 134.6, 139.2, 146.8, 153.9, 164.9, 90319-52-1

90319-52-1 (R)-4-Phenyloxazolidin-2-one 730425, aoxazolidine compound, is more and more widely used in various fields.

Reference£º
Article; Leitis, Zigm?rs; L?sis, Viesturs; Tetrahedron Asymmetry; vol. 27; 17-18; (2016); p. 843 – 851;,
Oxazolidine – Wikipedia
Oxazolidine | C3H7NO – PubChem

90319-52-1, (R)-4-Phenyloxazolidin-2-one is a oxazolidine compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

(4R)-3-[(2Z)-[4-[(1,1-Dimethylethyl)dimethylsilyl]oxy]-1-oxo-2-buten-1-yl]-4-phenyl-2-oxazolidinone (7) To a solution of acid 6 (6.0 g, 28.2 mmol) in THF (40 mL) at -78 C., was added triethylamine (4.00 mL, 28.2 mmol) followed by trimethylacetyl chloride (3.46 mL, 28.2 mmol) drop-wise. The mixture was warmed to 0 C. over 20 minutes, then the anhydride mixture was cooled to -78 C. Separately, to a solution of (R)-(+)-phenyl-2-oxazolidione (Aldrich) (4.60 g, 28.2 mmol) in THF (40 mL) at -78 C. was carefully added n-BuLi (2.50 M in THF, 11.3 mL, 28.2 mmol) and the mixture was stirred (30 minutes) then transferred to the anhydride solution at -78 C. The final reaction mixture was warmed to room temperature and stirred (over night). The mixture was diluted with EtOAc (200 mL), washed (H2O and brine), dried (Na2SO4), and purified by silica gel column chromatography (hexanes:EtOAc) to yield 7 as a colorless oil (10.2 g, 100% yield). 1H NMR (400 MHz, CDCl3) delta 7.36-7.20 (m, 5H), 7.10 (dt, J=11.6, 2.6 Hz, 1H), 6.50 (dt, J=12.0, 4.6 Hz, 1H), 5.44 (dd, J=8.8, 4.0 Hz, 1H), 4.68-4.59 (m, 3H), 4.22 (dd, J=8.8, 4.0 Hz, 1H), 0.85 (s, 9H), 0.00 (s, 6H). 13C NMR (100 MHz, CDCl3) delta 169.3, 160.6, 158.8, 144.3, 134.5, 134.0, 131.0, 122.0, 75.2, 67.9, 62.8, 31.1, 23.4, 0.00. ESI (+VE) m/z: 384.1 (M+Na)+. HR-ESI cacld for C19H28NO4Si (M+Na)+: 362.1782, Found: 362.1789.

90319-52-1, 90319-52-1 (R)-4-Phenyloxazolidin-2-one 730425, aoxazolidine compound, is more and more widely used in various fields.

Reference£º
Patent; The United States of America, as represented by the Secretary, Department of Health & Human Services; Burke, Jr., Terrence R.; Liu, Fa; Lee, Kyung S.; Park, Jung-Eun; (182 pag.)US10266565; (2019); B2;,
Oxazolidine – Wikipedia
Oxazolidine | C3H7NO – PubChem

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.99395-88-7,(S)-4-Phenyloxazolidin-2-one,as a common compound, the synthetic route is as follows.

Step 1): To a solution of (S)-4-phenyl-2-oxazolidinone (41 g, 0.25 mol) in CH2Cl2 (200 ml), was added 4-dimethylaminopyridine (2.5 g, 0.02 mol) and triethylamine (84.7 ml, 0.61 mol) and the reaction mixture was cooled to 0 C. Methyl-4-(chloroformyl)butyrate (50 g, 0.3 mol) was added as a solution in CH2Cl2 (375 ml) dropwise over 1 h, and the reaction was allowed to warm to 22 C. After 17 h, water and H2SO4 (2N, 100 ml), was added the layers were separated, and the organic layer was washed sequentially with NaOH (10%), NaCl (sat’d) and water. The organic layer was dried over MgSO4 and concentrated to obtain a semicrystalline product., 99395-88-7

As the paragraph descriping shows that 99395-88-7 is playing an increasingly important role.

Reference£º
Patent; Schering Corporation; US2005/96307; (2005); A1;,
Oxazolidine – Wikipedia
Oxazolidine | C3H7NO – PubChem

90319-52-1, (R)-4-Phenyloxazolidin-2-one is a oxazolidine compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

[00172] To a solution of Preparation H (1.4 g, 4.8 mmol) in THF (15 mL) was added NEt (1.3 mL, 9.6 mmol). The reaction mixture was cooled to 0 C and trimethylacetyl chloride (0.713 mL, 5.8 mmol) was added dropwise and the resulting solution stirred for 30 min at 0 C. In a separate flask, (i?)-4-phenyloxazolidin-2-one (3, 1.01 g, 6.24 mmol) in THF (45 mL) at 0 C was treated with 1 M LiHMDS solution in THF (dropwise addition of 6.24 mL, 6.24 mmol) and stirred at 0C. The lithiate was added via cannula to the first flask. The reaction mixture was allowed to warm to room temperature and was stirred for 3 hours. The reaction mixture was poured onto saturated aqueous ammonium chloride (50 mL) and the layers were separated. The aqueous layer was extracted with EtOAc (3 x 50 mL). The combined organic extracts were dried over anhydrous sodium sulfate and chromatographed on silica using EtOAc/Hexanes 0 to 100% gradient to give Preparation I as a white foam in 83% yield, m/z (M+H)+ = 433.3. XH-NMR (400 MHz; CDC13): delta 8.80 (d, J = 4.5 Hz, 1H), 8.11 (dd, J = 9.1, 5.7 Hz, 1H), 7.63 (dd, J = 10.5, 2.5 Hz, 1H), 7.48-7.43 (m, 1H), 7.40-7.30 (m, 6H), 5.47-5.44 (m, 1H), 4.71 (t, J = 8.9 Hz, 1H), 4.31- 4.28 (m, 1H), 3.20-3.11 (m, 3H), 2.49-2.46 (m, 1H), 1.82-1.67 (m, 6H).

90319-52-1, The synthetic route of 90319-52-1 has been constantly updated, and we look forward to future research findings.

Reference£º
Patent; BRISTOL-MYERS SQUIBB COMPANY; WILLIAMS, David, K.; SHAN, Weifang; ZHANG, Liping; CHERNEY, Emily, Charlotte; BALOG, James, Aaron; (80 pag.)WO2017/192813; (2017); A1;,
Oxazolidine – Wikipedia
Oxazolidine | C3H7NO – PubChem

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.2346-26-1,Oxazolidine-2,4-dione,as a common compound, the synthetic route is as follows.

WORKING EXAMPLE 20 In substantially the same manner as in Working Example 18, 2-[3-[3-methoxy-4-(5-methyl-2-phenyl-4-oxazolylmethoxy)phenyl]propyl]-1,3-dioxolan was condensed with 2,4-oxazolidinedione. The condensate was subjected to catalytic hydrogenation to yield 5-[4-[3-methoxy-4-(5-methyl-2-phenyl-4-oxazolylmethoxy)phenyl]butyl]-2,4-oxazolidinedione, which was recrystallized from dichloromethane-isopropyl ether to give colorless prisms, m.p.135-136 C.

2346-26-1, The synthetic route of 2346-26-1 has been constantly updated, and we look forward to future research findings.

Reference£º
Patent; Takeda Chemical Industries, Ltd.; US5932601; (1999); A;,
Oxazolidine – Wikipedia
Oxazolidine | C3H7NO – PubChem

695-53-4,695-53-4, 5,5-Dimethyloxazolidine-2,4-dione is a oxazolidine compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

A mixture of naphthalene-2,3-dicarboxylic anhydride (0.158 g, 0.8 mmol), 2 (0.104 g, 0.8 mmol), anhydrous NiCl2 (0.104 g, 0.8 mmol), urea (0.337 g, 5.6 mmol) and a catalytic amount of MOA was stirred in boiling sulfolane (3 mL) under argon for 1 h. After cooling to room temperature, the reaction mixture was diluted with water. The precipitate was filtered off and washed with hot water. After drying, the crude residue was reprecipitated from H2SO4/H2O, and the resultant precipitate was filtered off followed by the washings with hot water until the washings became neutral. The crude residue was extracted with ethanol and then trichlorobenzene. The trichlorobenzene solution was briefly passed through a short neutral alumina column, and the concentrated to ca. 5 mL under a reduced pressure. The precipitate was induced by adding hexane, and the obtained solid was recrystallized from trichlorobenzene/hexane to give 7.5 mg of 6 (6.4%). MASS (MALDI) (m/z): 702 (M+).

The synthetic route of 695-53-4 has been constantly updated, and we look forward to future research findings.

Reference£º
Article; Dudkin, Semyon V.; Makarova, Elena A.; Fukuda, Takamitsu; Kobayashi, Nagao; Lukyanets, Evgeny A.; Tetrahedron Letters; vol. 52; 23; (2011); p. 2994 – 2996;,
Oxazolidine – Wikipedia
Oxazolidine | C3H7NO – PubChem

95530-58-8, (R)-4-Isopropyloxazolidin-2-one is a oxazolidine compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

95530-58-8, To a solution of hex-5-enoic acid (11.24 g, 87.0 mmol), (4R)-4-isopropyl-1, 3-oxazolidin- 2-one (12.91 g, 113. 1 mmol) and DMAP (1. 06 g, 8.70 mmol) in CH2CI2, was added DCC (23.33 g, 113. 1 mmol) at 0 C and the mixture was stirred at 0 C for 15 min. Then the mixture was stirred at room temperature overnight and was filtered through a pad of celite and the filtrate was washed with sat. NaHCO3aq. The organic layer was dried over Na2SO4, filtered and evaporated. The crude product was purified by silica gel column chromatography (hexane-AcOEt 20: 1-10: 1) to give the titled compound (16.60 g, 73.7 mmol). 1H NMR (CDCI3) 6 : 5.90-5. 70 (m, 1H), 5.10-4. 95 (m, 2H), 4.50-4. 42 (m, 1H), 4.35-4. 15 (m, 2H), 3.10-2. 80 (m, 2H), 2.46-2. 30 (m, 1H), 2.20-2. 08 (m, 2H), 1.90-1. 68 (m, 2H), 0.92 (d, J = 7.1 Hz, 3H), 0.88 (d, J= 6.9 Hz, 3H) ppm

The synthetic route of 95530-58-8 has been constantly updated, and we look forward to future research findings.

Reference£º
Patent; PFIZER JAPAN, INC.; PFIZER INC.; WO2005/80317; (2005); A2;,
Oxazolidine – Wikipedia
Oxazolidine | C3H7NO – PubChem